STIHL stone cutter GS 461 / 45 – for wet cutting of ductile cast iron pipes – model 2024

ElastoStart makes starting even easier. This special starter handle ensures a smooth starting process without any sudden peaks in force. The integrated damper element smooths out the force curve that occurs when starting. …

The STIHL chains for wet cutting of rock have pre-sharpened diamond segments and thus deliver full performance from the first cut. The design of the chains with hump drive link enables quiet, low-vibration work.

The guide rails are equipped with an internal water flush. This flushes and cools the chain, the track of the chain and the deflectors. This ensures a long service life for the rail and chain as well as low dust pollution…

REDUCES DUST LOAD AND PROTECTS THE MATERIAL. The guide bar with internal water flushing ensures less dust exposure when working with your stone cutter. The chain, the groove of the guide bar and the deflection star are cleaned…

With the side chain tension and the captive nut on the outside, the chain can be easily changed and re-tensioned.

The water connection is located directly on the device and is mounted slightly higher. This makes the water supply very easy to connect and the connection is protected from dirt when the machine is placed on the floor. The water supply is…

FOR OPTIMIZED WATER CONSUMPTION. The water supply for the rinsing water of your stone cutter is integrated in the sprocket cover. The water is diverted here and fed back into the cutting gap, so that rinsing losses are minimized…

The water supply for the efficient use of the rinsing water is located in the sprocket cover. The water is diverted in the sprocket cover and fed back into the cutting gap in a targeted manner, thus remaining in the circuit.

When cutting walls, the motor housing is protected from damage at full immersion depth by a large rubber guard.

FOR MORE COMFORTABLE WORK. When your device develops power, vibrations are generated, which are particularly noticeable in the handle area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations…

Strong vibrations at the handles of power tools can lead to circulatory problems in the hands and arms over the long term. STIHL has therefore developed a high-quality anti-vibration system. Power tools with an AV system have vibration dampeners on the handles…

The decompression valve allows part of the compressed mixture to escape from the cylinder when starting. This significantly reduces the pulling force required on the starter rope. The operator is relieved and the entire starter system…

ENERGY-SAVING STARTING. The decompression valve makes it easier to start your machine. When starting, you can let some of the compressed mixture escape from the cylinder by opening the valve. This protects the starting system and you have to use less force on the starter rope.

LONGER FILTER LIFE. Pre-separation removes coarse, larger particles from the air stream before they can reach the actual filter. The HD2 filter keeps even fine dust away from the engine, thus ensuring…

LONGER FILTER LIFE. Pre-separation removes coarse, larger particles from the air stream before they can reach the actual filter. The HD2 filter keeps even fine dust away from the engine, thus ensuring…

The long-term air filter system with HD2 filter and additional filter keeps even fine dust away from the engine – for a particularly long service life. Thanks to the special material, the filter can be cleaned by washing it out, for example with STIHL Variols and warm water…

Allows easy, tool-free opening and closing of the tank and additionally protects it from dust.

QUICK AND EASY TO USE. Thanks to the tool-free tank cap, you can open and close the oil and fuel tank in just a few simple steps thanks to the bayonet lock.

The STIHL two-stroke engine with 2-MIX technology saves up to 20% fuel and reduces exhaust gases by up to 70% compared to STIHL two-stroke engines with the same performance without 2-MIX technology.